This post provides custom backgrounds for your LEGO^® Minifigures Disney Series collection 71012 suitable for use with the IKEA^® RIBBA Frame 23×23cm (9×9″).

Refer to our post How to display your LEGO^® Minifigures using IKEA^® RIBBA Frames for full assembly instructions on framing your collection.

Backgrounds

We have provided four variations of background image for LEGO^® Minifigures Disney Series, hopefully catering to everyone’s tastes and requirements.

The following background images are provided for PERSONAL USE ONLY. The LEGO Group of companies do not sponsor, authorise or endorse this fan created artwork or Internet site in any way.

As such, these images must not be sold, traded or swapped for gain or profit.

Unfortunately LEGO‘s Fair Play terms prohibit me from including the LEGO^® logo on these background images, however, you may simply add the logo yourself before printing.

LEGO^® Minifigures Disney Series

LEGO^® Minifigures Disney Series

LEGO^® Minifigures Disney Series

LEGO^® Minifigures Disney Series

As there are 18 minifigures in this collection, including some very tall pieces, this background uses a different mounting layout compared to other artwork we have created.

The Minifigures listed on the first background image are ordered as they appear in the official LEGO^® Minifigures Disney Series instructions (US | A4).

	Minifigure	Mounting Stand	Notes
	Stitch	1 × Slope, Inverted 45 2 x 2
	Alien	1 × Slope, Inverted 45 2 x 2
	Buzz Lightyear	1 × Slope, Inverted 45 2 x 2
	Aladdin	1 × Slope, Inverted 45 2 x 2	Lamp must be angled down so it fits behind the glass.
	Genie	1 × Slope, Inverted 45 2 x 2; 1 × Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)	Lamp must be angled down so it fits behind the glass.
	Maleficent	1 × Slope, Inverted 45 2 x 2
	Alice	1 × Slope, Inverted 45 2 x 2
	Cheshire Cat	1 × Slope, Inverted 45 2 x 2
	Daisy Duck	1 × Slope, Inverted 45 2 x 2
	Donald Duck	1 × Slope, Inverted 45 2 x 2
	Minnie Mouse	1 × Slope, Inverted 45 2 x 2
	Mickey Mouse	1 × Slope, Inverted 45 2 x 2
	Mr. Incredible	1 × Slope, Inverted 45 2 x 2
	Syndrome	1 × Slope, Inverted 45 2 x 2
	Peter Pan	1 × Slope, Inverted 45 2 x 2
	Captain Hook	1 × Slope, Inverted 45 2 x 2
	Ursula	1 × Slope, Inverted 33 3 x 2 with Connections between Studs	See below for details.
	Ariel	1 × Slope, Inverted 33 3 x 2 with Connections between Studs	A 3×2 brick is required to accommodate Ariel's mermaid tail. Shell and jewel must be angled down so they fit behind glass.

Ursula is a difficult minifigure to mount; She is just too big for a Slope, Inverted 33 3 x 2 with Connections between Studs, with her tentacle legs overhanging at the back by a couple of millimetres.

To make the mounting stand large enough, you will need to extend the Slope, Inverted 33 3 x 2 with Connections between Studs by gluing two small pieces of 280gsm paper to the back. This will give the exact depth needed to mount Ursula, and still fit her behind the glass holding the trident.

Parts Required

Parts required for LEGO^® Minifigures Disney Series:

#		Description	Part	Links
16	×	Slope, Inverted 45 2 x 2	3660
2	×	Slope, Inverted 33 3 x 2 with Connections between Studs	3747b
1	×	Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)	3794b

If you found this post helpful or useful in some way, please help us by doing the following:

• Like or link to this post from your favourite social media platforms;
• Click our advertisers banners;
• Make a Purchase through our associates links;
• Make a Paypal Donation;
• Leave a Reply below.

Chris