How to display your LEGO Minifigures using IKEA RIBBA Frames
Please share with your friends...
  • 16
  • 2
  •  
  • 4
  • 1
  • 1
  •  
  •  
  •  
  •  
    24
    Shares


⇐ BackPage⇑ First

Build


Reassembling the Frame

The fifth and final build step is to reassemble the frame.

To perform this build step, you will need the following items:

  • Glass cleaner
  • Cleaning cloth
  • Small flat blade screw driver

Once you have these items, proceed with the following instructions:

  1. Take the frame containing just the glass pane, and use glass cleaner with a cleaning cloth to give the glass a really good clean on both sides.
  2. Place the frame front down flat on a bench or table.
  3. Place the spacer back into the frame, and wipe the inside of glass with a cloth again to remove any residual dust.
  4. Gently and slowly lay the back panel into the frame.
  5. Use a flat blade screw driver to close the four retaining tabs.
  6. Turn over and wipe down the frame.
    LEGO Minifigures Series 16
    LEGO® Minifigures Series 16

Congratulations! You’re all done!

⇐ BackPage⇑ First

How to display your LEGO® Minifigures using IKEA® RIBBA Frames

Please share with your friends...
  • 16
  • 2
  •  
  • 4
  • 1
  • 1
  •  
  •  
  •  
  •  
    24
    Shares
Tagged on:                 

Leave a Reply

Your email address will not be published. Required fields are marked *