How to display your LEGO Minifigures using IKEA RIBBA Frames
Please share with your friends...
  • 16
  • 2
  •  
  • 4
  • 1
  • 1
  •  
  •  
  •  
  •  
    24
    Shares


⇐ BackPageNext ⇒

Build


Disassembling the Frame

The first build step is disassemble the frame.

To perform this step, you will need the following items:

  • Small flat blade screw driver or blunt project knife

Once you have these items, proceed with the following instructions:

  1. Check that the frame and glass is not damaged or scratched.
    IKEA RIBBA Frame 23×23cm (9×9")
    IKEA® RIBBA Frame (Front)
  2. Turn the frame over to the back.
    IKEA RIBBA Frame 23×23cm (9×9")
    IKEA® RIBBA Frame (Back)
  3. Remove the plastic wrapping from the frame.
  4. Use a flat blade screw driver or blunt project knife to lift the four retaining tabs, allowing you to then remove the entire back panel of the frame.
    IKEA RIBBA Frame 23×23cm (9×9")
    IKEA® RIBBA Frame (Back)
  5. Remove the picture mount included with the frame. This will not be used, and can be discarded along with the other packaging materials.
    IKEA RIBBA Frame 23×23cm (9×9")
    IKEA® RIBBA passe-partout (mount)
  6. Put the frame and glass panel aside for now.
    IKEA RIBBA Frame 23×23cm (9×9")
    IKEA® RIBBA Frame (Open)
  7. Place the back panel front-side facing up on your work bench.
    IKEA RIBBA Frame 23×23cm (9×9")
    IKEA® RIBBA Frame (Back Panel)

You are now ready to begin Adding the Background.

⇐ BackPageNext ⇒

How to display your LEGO® Minifigures using IKEA® RIBBA Frames

Please share with your friends...
  • 16
  • 2
  •  
  • 4
  • 1
  • 1
  •  
  •  
  •  
  •  
    24
    Shares
Tagged on:                 

Leave a Reply

Your email address will not be published. Required fields are marked *